Support
Looper's Delight
|
Support |
|
|
Hi Per, Thanks for the clarification and advice on using the Repeater. I am reseraching the Looperlative right now as an option, but I will probably try the Repeater first. If I continue to work with looping and have continued success with it, I will defintely purchase a Looperlative. Thanks again, Brittany Frompovich www.ladybassmusic.com www.myspace.com/ladybassmusic > >On 1 dec 2006, at 21.05, Matthew.Quinn@sunlife.com wrote: > >>I'd say a Repeater with an FCB1010 will solve your problem- I have the >>bottom 4 pedals of mine set to mute tracks 1-4 respectively, so you >could >>do your 'drum' track on tr 1, tritone track on tr2, then just mute >track >>2 >>when the time is right, mute the tritone track............... > >Above Matthew was describing the technic to do it in one loop. Each loop >in a Repeater can hold four mono tracks - of the same length - and you >can >mute or un-mute them to create variation in your arrangement. You can >also >create more loops, each of them with the option of holding four tracks. >Many instruments can of course be layered into a loop on the same track. > >Another technic would be to do it with many loops, following each other >on >a row, as the EDP lets you play. As an example you could do like this: >First record a "drum beat" as loop 1. When you move to loop 2 you can >chose to copy what was in the loop 1 and start overdubbing a layer on >top >of it, as loop 2. You may then go back to loop 1 again before moving on >directly to loop 3 while copying the "drum beat" of loop 1 to overdub >something else on top of the drums, as loop 3. I.e. you build each part >of >the song as a loop of its own and then you jump between those loops as >the >arrangement proceeds. The EDP can keep 9 loops in memory and that's >quite >enough for most arrangements, as you may layer many parts into the same >loops. > >For you it might as well be an idea to use two loopers and lay down the >drum beat on one so it can play along with the other tonal loops you >make >in the second looper (you can then mute the drums during vital parts, >reverse them to play backwards for a while etc). This can also be done >with a looper that can run multiple simultaneous loops of different >lengths, like the Looperlative or in software to be run on a computer, >Mobius. > >Greetings from Sweden > >Per Boysen >www.boysen.se (Swedish) >www.looproom.com (international) >http://tinyurl.com/fauvm (podcast) >http://www.myspace.com/looproom > > > _________________________________________________________________ Talk now to your Hotmail contacts with Windows Live Messenger. http://clk.atdmt.com/MSN/go/msnnkwme0020000001msn/direct/01/?href=http://get.live.com/messenger/overview