Support
Looper's Delight
|
Support |
|
|
Hi Stuart the RC-50 has 2 Main Outputs + 2 Aux Outputs. I have used them in different ways in the past: 1.) Link the Aux Outputs with the Aux Inputs (Adapter cable) This is my standard setting. I use this for feedback/multiply like tricks. 2.) You are more flexible when you route the Aux Outs back as a stereo channel in a mixer. Then, you can i.e. send the Aux Outs to an effect box and loop the wet signal. I.e. you can put the bass line on a PHRASE (loop) and route it through Aux Out. Then you can run it through a Phaser/Filter and modify the sound... 3.) I have used the RC-50 with four different speakers in four corners. You can play the sound in various positions, i.e. the four corners are: - Main Hard Left/Hard Right - Aux Hard Left/Hard Right The four "centers" are: - Main L/R center - Main+Aux Hard Left/Right - Aux L/R center So, the last option 3.) would be something you could use with your setting. There are two possiblities. A.) Looping in Multi-mode: - Make sure you are in Multi-mode - Make sure Rhythm Knob is turned off - Make sure All Phrases have Tempo Sync activated - You probably want to turn off Loop Sync - Plug your Guitar to Instrument Input Left - Send PHRASE 1 Output to Main Out - Connect your Guitar Amp to Main Out Left - Plug your Mic to Mic Input - Send PHRASE 2 Output to Aux Out - Connect your PA with the Aux Output You should make sure to - Send PHRASE 2 Output to Now you can loop your Guitar on PHRASE 1 and your Mic on PHRASE 2. For PHRASE 3, you can assign Guitar/Mic, however you like. B.) Looping in Single-mode (Mono only!): - Make sure Recording Mode is Stereo (yes, stereo ;-) - Make sure you are in Single-mode - Make sure Rhyhtm Knob is turned off - Make sure All three Phrases have Tempo Sync turned off - You can decide if all your loops should have same length (Loop Sync) - Plug your Guitar to Instument Input Left - Use a Preamp on your Mic (i.e. small Art Tube Preamp) - Send preamped Mic signal to Instrument Input Right (NOTE: I don't know if you can pan the Microphone Input actually???... I've never used it - if you can Pan Mic to hard right, you can skip the preamp) - Connect your Guitar Amp to Main Out Left - Connect your Main Out Right to your Mixer/PA This is the most care-free configuration. Because you can use/combine guitar/mic on any loop without worrying about the signal. Have fun! Buzap -- Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger