Re: Amp for guitar and keyboard?

["marcus kirby" <nrvana8775@gmail.com>]

Do you guys think a roland jc or the cubes would work for something like this? It's possible that I could have someone build me a 15" cab with power amp in there, and then use a tube pre-amp split for the guitar.

On Fri, Jun 20, 2008 at 12:33 AM, Dave Gallaher <micdave@hiwaay.net> wrote:

This is the same method I use and it works easily.  Since I use a Tonelab rather than an amp, the hookup is very simple to tweak, and the sound is hi fi and full range through the Bose L1.  I use a PorchBoard bass (www.porchboard.com ) for a kick drum sound, also routing it through so it can be recorded while laying down a guitar track (or a bass track if I send the guitar through the EH Micro Pog octave pedal).

 

dave

 

 

 

 

---

From: Travis Hartnett [mailto:travishartnett@gmail.com]
Sent: Thursday, June 19, 2008 4:51 PM
To: Loopers-Delight@loopers-delight.com
Subject: Re: Amp for guitar and keyboard?

 

GTR-->Channel 1
Aux 1 send-->EDP input
EDP output--> Channel 2

You could put your synth on Channel 3, and send it to the EDP via Aux1, etc.  Just be sure to never turn up the Aux 1 send on the EDP Channel 2, or it's a feedback loop.

The Aux return is empty.

On Thu, Jun 19, 2008 at 2:46 PM, marcus kirby <nrvana8775@gmail.com> wrote:

Oh, good lord :\

I'll have to think about this some more.

So, you sent guitar to channel 1, put the edp in the effects loop, and then sent the looped sounds to channel 2? I'm a bit confused as to how you completed the effects return/send and then put that into a new channel. Did you have an effects loop for each channel?