Support
Looper's Delight
|
Support |
|
|
Reset is the first thing to try, this is the next. Reseat the chips. Either you or a tech competent friend should open up the edp. There are a number of chips in sockets, sometimes the connection goes bad and the chip has to be wiggled about in the socket, or removed and replaced. One time it happened to me, and all I did was press firmly down on each chip, and it worked ever since. andy butler Timothy Miller wrote: > Not having any luck at the moment. Any other suggestions? > > On Mon, Apr 20, 2009 at 8:52 PM, Rick Miller <bs@tanawana.com > <mailto:bs@tanawana.com>> wrote: > > From my manual - > “The Parameters can be reset to the factory defaults. To do this, > hold down the Parameter Button when you turn on the power to the > Echoplex. Once the start up screen displays, you can release it. > When the Echoplex has fully booted up, all of the Parameters will > be reset.“ > > Keep your fingers crossed :O) > > rick > > > On 4/20/09 9:27 PM, "Timothy Miller" <timmylmiller@gmail.com > <mailto:timmylmiller@gmail.com>> wrote: > > My question is probably more dumb: > > How do you reset it? > > On Mon, Apr 20, 2009 at 8:23 PM, Rick Miller <bs@tanawana.com > <mailto:bs@tanawana.com>> wrote: > > > Might be a dumb question but did you try to reset it maybe?? > > Rick > > > > On 4/20/09 8:21 PM, "Timothy Miller" <timmylmiller@gmail.com > <mailto:timmylmiller@gmail.com>> wrote: > > So this is the situation: > > My echoplex digital pro wasn't giving out any sound, so > I went ahead and switched wall outlets as well as moved > it to a different location. Now when I turn it on, it is > frozen ( most lights are on and won't budge or numbers > will show up on screen and won't budge.. Loop name > doesn't flash through the screen ). I've tried different > outlets to fix the problem but nothing will work. What > do I do at this point? If nothing is resolved, will > Gibson be able to fix it even though they stopped making > them? > > > >