Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Dr-880 and Echoplex Synch Issues



Hi Andy,

Thanks for the reply.  I actually reversed everything and now I don't have 
any issues at all.  The info that helped me is located at 
http://www.sweetwater.com/insync/techtip.php?find=05/12/2006 .  It could 
just be the DR-880, but for now the two will not sync very long when the 
EDP 
is controlled by the Drum Machine.  Actually, I feel the way it's setup 
now 
is better for me so I'm quite happy that my new setup works.  Having the 
EDP 
in total control seems to be the ticket...for me anyway.

Thanks again,

Jim


----- Original Message ----- 
From: "andy butler" <akbutler@tiscali.co.uk>
To: <Loopers-Delight@loopers-delight.com>
Sent: Sunday, August 23, 2009 12:58 AM
Subject: Re: Dr-880 and Echoplex Synch Issues


> hi Jim,
> EDP should stay perfectly synched forever.
>
>
> Jim Atwood wrote:
>> Hi everyone,
>>
>> I am having some issues synching my Boss DR-880 with the a my Gibson
>> Echoplex Digital Pro Plus running LoopIV v1.1 software.  I am not sure
>> if I am having a problem or if what's happening is normal.
>>
>> I have my DR-880 Midi Clock set to "Interntal".
>
> I'd guess that's right
>
>>1 I have the Echoplex
>> Quantize set to "Off",
>
> doesn't matter
>
>> Sync Parameter set to "In", and 8ths/Cycle set to
>> "8" respectively.
>
> correct
>
>>
>> I then restart my drum pattern by changing presets back and forth to
>> ensure the internal clock is reset properly.  I've heard on Boss Drum
>> machines that the clock can get messed up if you don't change the
>> patterns back and forth.  I then start the Drum machine.  I can see the
>> Echoplex picking up Looptime and a little green LED picking up the
>> tempo.
>
> Should also be a "led" display in the main display (bottom right).
> A small flash above the "E" of "MULTIPLE" to show sync received.
> Another flash above "L" when edp makes a correction to stay in synch.
>
>
>
>
> At this point all looks great.  I then proceed to record a 1 or
>> 2 measure guitar pattern.  When finished everything is in "perfect"
>> synch.  I then solo over the top of my jam for about 2-3 minutes.  It is
>> at this point that I start to "FEEL" like the beat and guitar part is
>> drifting slightly.  In fact, it sounds like the pattern may even be
>> fading.  ( Note that throughout my looping, I have the Feedback set to
>> "100%" which is 127 I believe. )
>>
>
> If the loop is fading with fbk at 100%, then you must be in "Overdub",
> in which case synch will be lost.
> If you're not in overdub, then check the "Loop/Delay" param.
> (may be called something different if you have the black edp, I'm not 
> sure)
>
> andy
>


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.409 / Virus Database: 270.13.64/2320 - Release Date: 08/22/09 
18:04:00