Re: EDP question

[mark francombe <mark@markfrancombe.com>]

>as if it was putting me in tempo select mode---

But IS IT in tempo select mode? Test by twisting the feedback knob. and see if the tempo changes..

Are you sure that its not just that the new preset has a different amount of nextloops set, to the preset that you are changing from? Then EDP tends to display the amount of seconds of loop time PER loop, when you enter this new loop. If you swap between loops that have the SAME number of nextloops, it shows nout, apart from the preset number... AND rememebr tat the only time iot will display this seconds number is when in reset (stopped) cos when you change presets whaile running, it EDP doesnt change your nextloops settings. (Cos if you go from a 6 loop preset to a 2 loop preset, you would lose 4 loops, which EDP doesnt let you do, clever bugger.

maybe its that?
Check if the preset is working anyway?

M

On Sun, Sep 20, 2009 at 2:45 PM, L.Angulo <labaloops@yahoo.com> wrote:

Hi there gang,
I have an unusual problem with my EDP,i have 3 presets which i call with my FCB1010 through program changes 1,2 and 3.
everytime i call up program 1 the screen of the EDP shows the number 100 as if it was putting me in tempo select mode which i dont want,ive checked my FCB1010 settings and all is sending is program 1 and ccs to the expression pedals anybody knows what the problem might be?
i guess i could overwrite the preset but im curious what has happened.
thanx
Luis

www.myspace.com/luisangulocom

-- 
www.markfrancombe.com
http://vimeo.com/user825094
http://uk.youtube.com/user/markfrancombe

http://www.myspace.com/markfrancombe
http://www.looop.no/shop/catlabel.php?q=Synch%20Non%20Synch