Re: using gordius with mobius and a drum machine

[Sylvain Poitras <sylvain.trombone@gmail.com>]

> the one thing i dont particulary like about gordius is the way the 
>buttons are layed out maybe he could put the guts into an FCB1010;-)

Isn't that what the LG Module is for?  I don't know if all the
features are the same, might be worth checking out if you already have
a FCB1010

http://www.gordius.be/midi-footcontroller-lgm.php

Sylvain

On 9/23/09, L.Angulo <labaloops@yahoo.com> wrote:
> ok but to be more specific:(assuming the edp is being slaved)
>
> could it simulate the muteQuantMIDI start song that the EDP does when 
>being the master?
> could it simulate the QuantMIDI start song?
> could it start and stop both devices and keep them synced?
> or either one and restart them while still being synced?
>
> > Interestingly, I also had it programmed to operate my 2
> > edps either together or
> > independently. Not been able to do that before.
>
> that sounds awesome!though ive stopped using both in stereo because they 
>still drift out of sync over a short period of time
> the one thing i dont particulary like about gordius is the way the 
>buttons are layed out maybe he could put the guts into an FCB1010;-)
> thanx mate
> Luis
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> www.myspace.com/luisangulocom
>
>
> --- andy butler <akbutler@tiscali.co.uk> schrieb am Mi, 23.9.2009:
>
> > Von: andy butler <akbutler@tiscali.co.uk>
> > Betreff: Re: using gordius with mobius and a drum machine
> > An: Loopers-Delight@loopers-delight.com
> > Datum: Mittwoch, 23. September 2009, 1:09
> > hi Luis,
> > the Gordius LG is capable of an awful lot.
> > It'll send any number of commands each with a specified
> > channel.
> > It's also possible to a) use it as midi clock (tap time or
> > preset)
> > b) sync it to a midi clock! c) program delays into the
> > stream of midi commands that are based on midi timing.
> > So it functions as a mini sequencer if that's required, it
> > can
> > even loop a series of commands.
> >
> > The one thing it can't do is wait to the end of a bar to
> > send a command.
> >
> > Interestingly, I also had it programmed to operate my 2
> > edps either together or
> > independently. Not been able to do that before.
> >
> >
> > andy butler
> >
> >
> >
> >
> >
> >
> >
> >
> > L.Angulo wrote:
> > > yo Brosky!
> > > Im writing you because i know you use both of this and
> > might know the answer better than i do.
> > > anyway,im currently using the FCB1010 with the UnO
> > software.
> > > Since i am staring to do a lot of syncronization with
> > the
> > > Adrenalinn drum box and mobius i am
> > > suffering from little limitations so instead of
> > getting an external sequencer ive been checking
> > > out foot controllers that could perhaps do what i want
> > by sending certain simple midi messages.
> > > Mobius like The EDP has some really cool midi features
> > like the"midi mute switch quant" which will stop both the
> > drum machine and the looper and
> > > restart them again at the end of the loop to create a
> > cool break and so on.
> > > however when i use the drum machine as the master
> > which i prefer lately a lot of this is not possible to
> > accomplish with either mobius or the drum machine.
> > > So my question is,how advance or programable is
> > Gordius to
> > > send such comands to control both devices on separate
> > chanels? can the little giant act as a sort of small
> > sequencer to send things like start/stop,restart drum
> > machine at then end of a loop etc. commands? if u ever get a
> > chance to try this let me know!
> > > thanx man
> > > cheers
> > > Luis
> > >
> > >
> > >
> > >
> > >
> >
> >
>
>
>
>
>