Re: AW: monome as foot controller

["L.Angulo" <labaloops@yahoo.com>]

sounds great but let us konw once you have it done,tell the bilder if he 
does a goo job for u we might jsut follow;-)
cheers
www.myspace.com/luisangulocom


--- Zoe Keating <info@zoekeating.com> schrieb am Mo, 26.10.2009:

> Von: Zoe Keating <info@zoekeating.com>
> Betreff: Re: AW: monome as foot controller
> An: Loopers-Delight@loopers-delight.com
> Datum: Montag, 26. Oktober 2009, 20:08
> yup saw that. metal switches again.
> 
> i don't need the feedback you get from a sprung switch and
> really want something more tactile. seems like there are so
> many soft pressure switches on the market.
> 
> i'm excited about a custom job! got lots of replies to my
> twitter posts about it today.
> 
> i'm thinking 12 pads in 2 rows that are about 1.5 to 2
> inches square and fully customizable so i can send MIDI
> notes, PC messages, OSC and/or computer keys.
> 
> while i'm in fantasy land....the ability to change the
> "bank" of the pedal with my Kbow...and each pad will light
> up with 1 of 4 colors to tell me what bank i'm in.
> 
> not cheap...but possibly worth it.
> 
> On Oct 26, 2009, at 7:25 PM, L.Angulo wrote:
> 
> > Hi Zoe,
> > I dont know if u are aware of this one:
> > 
> > http://www.youtube.com/watch?v=Hw6mlLt-fvg
> > 
> > I just bought one but havent gotten it yet,to replace
> my bulky FCB1010 it also has the same amount of buttons but
> half of the size of the FCb is plus it can send any midi
> comand you can think of.
> > I worte Jeff about the switches since i was concerned
> about their loudness but he said they are a lot more quiet
> than in the video because the microphone was place very
> close to it.
> > check out the other videos as well,you might also ask
> him if he could customize some switches for you he seems
> very open,though this unit is not cheap!
> > cheers
> > www.myspace.com/luisangulocom
> > 
> > 
> > 
> > 
> > 
> > 
> > --- Zoe Keating <info@zoekeating.com>
> schrieb am Mo, 26.10.2009:
> > 
> >> Von: Zoe Keating <info@zoekeating.com>
> >> Betreff: monome as foot controller
> >> An: Loopers-Delight@loopers-delight.com
> >> Datum: Montag, 26. Oktober 2009, 13:41
> >> I just had another switch break on an
> >> FCB1010 and it started sending junk data...just
> like my last
> >> three FCB1010s
> >> 
> >> (p.s. I have the Uno firmware and no I don't want
> a Ground
> >> Control or anything w/ awful metal switches)
> >> 
> >> I'm DONE with this pedal.
> >> 
> >> I'd like to find a maker-whiz to build me a custom
> pedal
> >> from a monome kit.
> >> 
> >> One thing I'd like is those same translucent
> silicone
> >> rubber pads but LARGE (between 1.5 inches and 2
> inches
> >> square). Has anyone ever seen any anywhere and
> know where to
> >> source them?
> >> 
> >> thanks much,
> >> 
> >> Zoe
> >> 
> >> 
> > 
> > 
> > 
> > 
> 
>