] [Thread Prev
Re: help assigning RME audio outputs to Mobius ports
don't forget about rme's matrix mode...very cool for quick routing
On Tuesday, September 28, 2010, Louie Angulo
> thanx Jeff and Per,yes im using it as a stand alone,i just got the RME
>400 used without a manual but im just reading the online one and i think
>is done by rather assigning channel 1+2 on every channel strip of the RME
>software mixer,im at work and cant try this right now but so it seems in
>the manual on pg.66.
> Now i have to find out how i can quickly do a "panic mute all output" or
>access the master level since i dont want to use a mixer
> I see it can also be configured to be controlled by a midi remote control
> In the manual it says:
> "TotalMix can be remote controlled via MIDI. It is compatible to the
>widely spread Mackie Controlprotocol, so TotalMix can be controlled with
>all hardware controllers supporting this standard.Examples are the Mackie
>Control, Tascam US-2400 or Behringer BCF 2000.Additionally, the stereo
>output faders (lowest row) which are set up as
> Monitor Main outputs inthe Monitor panel can also be controlled by the
>standard Control Change Volume via MIDIchannel 1. With this, the main
>volume of the Fireface is controlable from nearly any MIDI equipped
> so what would be a nice and compact controller to use for this,any
>recomendations or is anybody using it with something like that? the
>smallest the better!
> On Tue, Sep 28, 2010 at 6:48 PM, Per Boysen <firstname.lastname@example.org> wrote:
> You do this in Mobius Track Setup. Depending on if you are using
> Mobius as a standalone application or a plug-in inside a host
> application you use either "Audio In/Out Port" or "Plugin In/Out
> port". If running it as a plug-in you may also need to match the
> settings of the host application.
> Greetings from Sweden
> Per Boysen
> www.boysen.se <http://www.boysen.se/>
> www.perboysen.com <http://www.perboysen.com/>
> www.looproom.com <http://www.looproom.com/> internet music hub
> On Tue, Sep 28, 2010 at 5:23 PM, Louie Angulo
> <email@example.com> wrote:
>> Hi folks,
>> I recently bought the RME FW400 and im having problems assigning ports.
>> I have on my RME mics plugged into channels 1,2 and stereo guitar signal
>> into 3,4,
>> i only hear the output of the mics but not the guitars.
>> In mobius i would like to have them all assigned to ports 1,2 to be
>> record in any track i want
>> is this possible or how do you guys do this?