[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Ping Pong delay on Fireworx
...except there aint a quad tap (on my machine at least!)
Theres stereo, dual (that feel should be able to do it cos it has this cross feedback thing) a dual three tap (very complicated one with TWO sets of 3 taps... maybe if I muted all but on in each.. sure i trid that too) a one tap and a SIX tap, no quad tap...
With setting a BIT like you suggested but using the six tap, I CAN get one delay left one right, but then the start being center again...
On Fri, Feb 4, 2011 at 1:08 PM, Simeon Harris
<simeonharris40@googlemail.com> wrote:
not sure the dual delay is the one you want, because that's two independent delays and you want one to feed back into the other
any of these time settings will work - 1/16 + 1/8......1/8 + 1/4.....1/4 + 1/2 etc
the trick is to get the longer delay to feed back into the shorter delay. try one of the other delay blocks. i think the quad tap will do it. just put taps 3 and 4 at zero level. set delay 1 at 1/8 with level at 100% and delay 2 at 1/4 with level at 80%. set feedback on delay 2 at 30%
sim
--
mark francombe
www.markfrancombe.comwww.ordoabkhao.comtwitter @markfrancombe
http://vimeo.com/user825094http://www.looop.no
