Re: Syncing two EDPS

[andy butler <akbutler@tiscali.co.uk>]

Can't you just midi sync the EDPs ?
A splitter after the Electribe?

params
SYNC = In
8th/Cycle = length of bar 

OR

the edp looptimes can be shown as slightly different,
and they'll still be in sync, as the syncing action
chops the loop slightly.
I'd guess actual beat length is .505 (or so) 
and the edps should stick to that.


andy

marcus kirby wrote:
> Here's my current setup:
>
> Electribe midi out -> Moog MP201 Midi in -> CV Gate on/off to EDP1 and 
> EDP2 Beat Sync.
>
> EDP one ranges anywhere from .50 to .51 when trying to catch the beat, 
> which is fine when it's just one EDP. But when two start going together, 
> I'll have one at .51 and the other at .50, which makes EDP2 slightly off 
> sync.
>
> Is there a better way to sync the two?