Support
Looper's Delight
|
Support |
|
|
I've connected the FC-200 to my line 6 delay pro it's set to get info on channel 1 it reads all the program changes I send it I have not changed the settings on the FC-200, and it used to work I also connected 2 midi keyboards to the LP1, put the LP1 in MIDI/USER btn mode and hit every key and button on the boards nothing I may be missing something simple here...but what? Thanks, Chris On Jul 8, 2011, at 12:07 PM, Daniel Thomas wrote: > Any midi data filters running in your midi configuration? > > Do you have an LED midi tester? This might help you route out whether > its a problem with a jack, cable, or midi config. > > > Daniel > On Jul 8, 2011, at 10:05 AM, Chris Beaty wrote: > >> I've tried all 16.....one, after the other >> Wish I knew what I was missing here... >> and this did work, once upon a time >> any other notions? >> Chris >> On Jul 8, 2011, at 12:01 PM, andy butler wrote: >> >>> Chris Beaty wrote: >>>> Hi simeon, >>>> thanks for getting back >>>> I'm simply trying to control the LP1 with my Roland FC-200 >>>> this actually used to work, once upon a time >>>> now, when I put the unit in the MIDI/USER btn mode, and push the >>>> FC-200 pedals, I get Nada >>>> I've checked the midi traffic withe pedal-channel 1 and other midi >>>> devices see incoming data from the FC-200 >>> >>> That would be a sign that the LP1 midi channel is not set to one that >>> the FC-200 is sending on. >>> >>> andy >>> >>> >>> >>> >>> >> >> Thanks, >> Chris >> >> >> > > Thanks, Chris