Support
Looper's Delight
|
Support |
|
|
Sounds to me like you are sending MIDI note on and off messages, not MIDI clock. On Sun, Sep 4, 2011 at 5:57 PM, mark francombe <markfrancombe@gmail.com> wrote: > > Weird thing, playing with some guys right now, and they need midi clock > from > me, they say that thr clock they are getting from me has a kind of stop > In > it... So their gear is not working... Weirdly this happened to me > recently > when this same edp was plugged into the repeater, the repeater would just > stop after one note... > Help > > M > Sent from my (advertisement removed) > On 4 Sep 2011, at 16:16, james leight <jleight881@hotmail.co.uk> wrote: > > Sadly I can't test the cable with anything else because I don't have > anything that uses that type of cable unless theres another way to test > it? > I was wondering if I could use an adapter with the american cable as the > echoplex has its own voltage switch I shouldn't need a voltage converter > should I? > > > ________________________________ > From: matilists@gmail.com > Subject: Re: EDP Powering problem. > Date: Sun, 4 Sep 2011 09:53:20 -0300 > To: Loopers-Delight@loopers-delight.com > > > On 2 Sep 2011, at 19:46, james leight wrote: > > Ahh 2.5A 250V~ mines 10A 250V~ don't know if this is the actual problem > because the lead that came with it reads 10A 250V~ but I might go and > look > for another lead anyway. > > thats not the problem > if one was only 130V it would theoretically be possible to create a short > circuit when loaded with 230V but very unlikely > the current through the EDP is far below 2A anyway, so if there was a > fault > in it, the internal fuse would blow, exept if there is a short cirquit > right > at its power socket. > the safety switch reacts to much smaller currents that "run away" so if > only > this switches off, there may be a insulation problem in the EDP, maybe > even > a cap between power input and ground which is too big for your safety > switch. > first test would be whether the power cable itself makes the fuse blow > > It's lucky my house has a safety switch when things like this happen =] > > Cheers for your help halim > > ________________________________ > Date: Sat, 3 Sep 2011 06:07:48 +0800 > Subject: Re: EDP Powering problem. > From: halimzainal@gmail.com > To: Loopers-Delight@loopers-delight.com > > hi james. i had the same problem with the edp when i first got it from > the > US. i live in malaysia and we run the same voltage as the UK (230-240) > But > i'm thankful because the guys here at LD helped a total noob like me to > make > it run. i did not put my edp in use for quite sometime until i'm sure > that > i'm using the right cables..even learning how to flick the voltage > switch at > the back :P . i used a cable marked with the voltage 2.5A 250V~ (a > regular > computer power cable which i snatched from my pc) and voila! the edp was > alive. I'm sorry i can't help you with the blown fuse but i'm sure it's > fixable. > i googled my old posts and it did bring some memories of how nice people > in > this list can be. sorry to butt in. > Best, > > On Sat, Sep 3, 2011 at 3:34 AM, james > leight <jleight881@hotmail.co.uk> wrote: > > Well, the only you can do to the plug is take the fuse out theres no way > to > get into the plug without mangling it up. Its a 5a fuse. > > ________________________________ > From: mark@markfrancombe.com > Date: Fri, 2 Sep 2011 21:12:39 +0200 > Subject: Re: EDP Powering problem. > To: Loopers-Delight@loopers-delight.com > > It should be James, it should be.. check for a short in the plug? > > On Fri, Sep 2, 2011 at 9:03 PM, james > leight <jleight881@hotmail.co.uk> wrote: > > I just purchased the EDP and as I got from america and I live in england > I > thought it would be easiest to buy a replacement power cord. The > replacement > looked pretty much identical so I decided to it in, switched the voltage > on > the EDP to 230 and then switched it on, all my outlets blew. > so I was wondering if anyone can help me with this? I'm thinking it must > be > the lead because the guy I bought it from said it was working fine > before he > sent it. Is it possible to just plug adapter and use the american lead? > Cheers > James > > > -- > Mark Francombe > www.markfrancombe.com > www.ordoabkhao.com > http://vimeo.com/user825094 > http://www.looop.no > twitter @markfrancombe > > > >