Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

RE: DigiTech JamMan Express XT /


I just friend requested you on FB - ready to run out of the lab here on a bunch of errands then I'm in bed noon to 8p - 

Not sure if those pix of my JamMan arrangements and mods are on my personal profile or on my artist page (http://facebook.com/rejynamusic)  - a little scrolling search may be in order :/

Also, one way I used to work a song when I was using only one JamMan was to record, play/save the verse loop.  When the chorus came, I'd play that live, then when the bridge came, I'd have already advanced to the next (empty) memory slot on the JamMan and record/play/save the bridge there.  When the bridge was over, one pedal push down a memory slot and the verse would play on the next 1.  Tricky, but doable.

Now that I have six JamMan's on the floor, I'm just beginning to tap into the possibilities.  Haven't posted videos yet of the new rig, but my current YouTube vids do show how I used the single looper.  Search 'Rejyna'  - - -

Big advantage is being able to save while the looper is playing - not sure if any other loopers out there will save while they're playing (my RC3 and RC30 do not, they must be stooped to save and adjacent loops do not play seamlessly) - - - and the 3 button for the JamMan is a must for advanced use (imho) -

Hope this helps


From: mike@michaelplishka.com
To: Loopers-Delight@loopers-delight.com
Subject: RE: DigiTech JamMan Express XT /
Date: Tue, 11 Nov 2014 23:23:24 -0600

Very cool!  Thanks for the info Rejyna!  What’s your facebook page – would love to check it out!






From: Rejyna MDW [mailto:rejyna@msn.com]
Sent: Tuesday, November 11, 2014 6:03 AM
To: Loopers-Delight@loopers-delight.com
Subject: RE: DigiTech JamMan Express XT /


Short answer is yes, you'll need the FS3x however, even though you can save loop 1 while it is playing, you would have to:

1) stop the looper, advance to the next slot, then play and record, save that loop 2 to an ajacent memory location.  Then you can switch between the two loops.

2) get a 2nd looper and two FS3x's.  Put the FS3x for Looper A next to looper B in such a way as to allow one stomp to stop Looper A while also starting Looper B.  Same with the FS3x for Looper B, it goes next to Looper A.

You can see this in some of the photos on my Facebook pages, if we're connected.

This is a short answer but I hope it covers your question.  I know what you are trying to accomplish - it is similar to my needs.  Now that I have (5) XT's sync'd and my old non-XT also on the floor, I can accomplish what you're seeking.

There is also a DIY mod that I came up with to allow 'saving' with your foot instead of bending down.



> From: mike@michaelplishka.com
> To: Loopers-Delight@loopers-delight.com
> Subject: DigiTech JamMan Express XT /
> Date: Tue, 11 Nov 2014 01:40:25 -0600
> Hi all,
> Quick question, does the Jamman Express XT allow you to record say one
> progression, store it, then make another progression, and then switch
> between the two handsfree? Or do I need the extra pedal they sell?
> Thanks!!
> Mike
> www.michaelplishka.com