Re: Echoplex EDP question

[Michael Rivard <microvard@gmail.com>]

Thanks, Marc. How do you change to Quantize=Off? I should also add that only want the loop to play once, and then would have to be retriggered to play again.

On Fri, Jan 26, 2018 at 5:42 PM, mark francombe <markfrancombe@gmail.com> wrote:

MuteMode=Start

When MuteMode=Start, a second press of the Mute button will always restart the current loop at the beginning. This is probably the most useful setting for solo playing.

When MuteMode=Start, the end of the Mute is affected by the setting of Quantize. If Quantize=On, then sound won’t restart until the end of the current cycle. 

On Fri, Jan 26, 2018 at 11:33 PM, Michael Rivard <microvard@gmail.com> wrote:

Hi there,

Been on the list for awhile but this is my first time sending out to the hive mind, and pardon my ignorance in the following matter:

I used to have an old Lexicon JamMan which i swapped out for a Gibson reissue of the EDP, which was was a good move. But one thing that the JamMan could do that I haven't been able to figure out with the EDP is you could sample a note or phrase and then play it back from the beginning without running through the whole loop. 

I don't have the manual at the moment and am about to do a gig and wondering if anyone out there could give me a quick and dirty tutorial on how to get the EDP to do that? I know it has something to do with Mute mode, but right now it mutes the loop and then starts it from the same point, not the beginning.

Thanks!

Mike

--

Mark Francombe
www.markfrancombe.com

www.ordoabchao.no
twitter @markfrancombe

ELECTRICITY

www.electricitymusic.com