RE: EDP 4mb 30pin simms

["Lee Barnes" <lee.b1@home.com>]

        Another place to check out, albeit all of the sites are typically 
within
the USA is that of http://www.pricewatch.com .  At last go, it was a matter
of finding SIMMs that were faster than either 90ms or 80ms(this is the easy
part) and then making sure that you're 4MB'ers are all of the same type.
While I still had mine I tried mixing and matching for both parity and
non-parity on one of the Trace Elliot EDP's and found that parity tended to
work a little more stably.

        Lee

-----Original Message-----
From: Floyd Miller [mailto:floyd@studiodust.com]
Sent: Saturday, January 13, 2001 1:49 PM
To: Loopers-Delight@loopers-delight.com
Subject: Re: EDP 4mb 30pin simms


Try http:/www.crucial.com

Click on "search by memory type",
Select 30-pin simm

They have Fast Page Mode, Unbuffered Non-Parity 4MB Simms.
I think those will work in the EDP.