[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: DL4 potentiometer and pedal comments



Yep, that's what it seems like to me also based
on the usual serial numbering schemes.  But its
strange because the Line 6 support site says the
pot is a 10K linear.  Does anyone out there have
a meter to hook up to it?

D7

--- David Myers <dmgraph@earthlink.net> wrote:
> Haven't been following this thread, but I'll put in my .02 and say that 
>you
> must certainly have here a linear taper 20K pot, probably a dual.  No
> problem using a much easier to find 25K.  That's all from Mensa Central.
> Now if I were psychic, I'd tell you what the "3" means ("made in the 
>third
> world"?)...
> 
> DLM
> 
> on 4/5/01 12:04 PM, rich at rich@nuvisionsca.com wrote:
> 
> > hi all,
> > 
> > here's the info for the pot inside the expression pedal from Line666.
> > just four little screws...that wasn't so bad...
> > 
> > a part number:
> > 
> > 6G
> > 3B20KX2
> > 
> > so, you electrogizmopartsandsolder guys should be able to go from
> > there, yes?  that's the only info on the pot.  hope this helps.
> 


=====
Dumeril7                    dumeril7@SPAMBEGONEyahoo.com
Anti-spam measures in place -- remove "SPAMBEGONE" from
my e-mail address if you want to use it....

__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail. 
http://personal.mail.yahoo.com/