] [Thread Prev
RE: Too many loopers, not enough auxes...
I ordered an EZ Bus in Oct but got tired of the "only two more months till
its ready" remarks. I think it is a great concept if you are willing to
an external mixer (non rack mounted).
Recently I have decided to install an Ashly LX308B which is 8 stereo
channels (with no busses) and then will run my processing, effects and
looping in series from the Ashly main outs. Hopefully it will work as I
don't know any other way to set up so that I don't have to connect
everything up when I set up.
P.S. I too have a Rocktron Rack Interface. A great device, but I just
have any more room for it so I would be willing to sell it as well.
> I am waiting for the release of the Event EZ1, a digital mixer that (on
> paper) should allow any configuration using its several ins/outs.
> It also switch itself into a midi controller: in less words this machine
> should do what a Switchblade and a Peavey 1600x can do together. (I still
> have to touch and check one, so these thoughts could be easily found
> I also have a Rocktron Rack Interface that I use no more, should
> it interest
> anyone, mail me.
> all my best
> ----- Original Message -----
> From: John Tidwell <email@example.com>
> To: <Loopers-Delight@loopers-delight.com>
> Sent: Sunday, July 22, 2001 6:38 AM
> Subject: Re: Too many loopers, not enough auxes...
> > David Coffin submitted a post awhile back that gave
> > his solution using a Mackie. What it came down to was
> > using buss assignments & spare mixer outputs as fx
> > sends. I cheated an extra fx send out of the mixer on
> > my Tascam 488 by using its monitor outputs.
> > I was recently going thru a box of old hi-fi system
> > junk & came across a little box called a Tape Control
> > Center, made by Realistic. It allowed you to hook up
> > to 3 tape decks to the tape monitor connection on a
> > home stereo receiver. It has switches that allows for
> > a rec/play/dub matrix. I now have it hooked to 2 aux
> > sends from a Rocktron G612 rack mixer to provide 3
> > stereo fx sends. I currently have my Vortex, DL-4, &
> > Digitech 2101 connected to this. The other 2 sends on
> > the G612 go to my EDP & Digitech 2120. I'm still
> > tinkering with the setup & wondering how I'll work
> > the repeater into all of this.
> > I wish Line 6 would come out with a "mixer modeler".
> > That way I could turn a knob & have 8 aux sends & 24
> > channels. ;-)
> > John
> > --- Tim Nelson <firstname.lastname@example.org> wrote:
> > >
> > > I'm still far from sure that it's the best way to
> > > connect it all, though.
> > > How have you guys approached using a massed pile of
> > > several simple loopers
> > > in combination (as opposed to a more
> > > multi-functioned device like the EDP)?
> > >
> > > -t
> > >
> > =====
> > John Tidwell
> > __________________________________________________
> > Do You Yahoo!?
> > Make international calls for as low as $.04/minute with Yahoo!
> > http://phonecard.yahoo.com/