[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Behringer/Repeater (EDP) foot controller
Hi,
I also got one of these new Behringer FCB1010, and I must say I like it a
lot. Thanks to David Auker I finally understood how to assign many midi
commands to the same foot pedal and this opened up a lot of possibilities.
Unfortunately you can only set midi channels globally. In my case this
means
I have to dedicate some pedals for the EDP and have the rest for Repeater.
But I can live with that.
Oh, and one bug I found out after a lot of head ace: When programming
Behringer Program Change for the Repeater you have to write the number
above
the one you want. As an example, Repeater records on midi PC 3, which means
I have to program the Behringer pedal to send "midi PC 4".
Ok, anyway, here's what I've set up sofar for rehearsals:
Bank 00
01 rec trk 2 -12
02 undo trk3 pitch =0
03 trk rec selct
04 loop down
05 loop up
06 multiply
07 trk 2 pitch -12
08 trk 3 pitch+12
09 reverse
10 EDP reverse (EDP foot controller INSERT ý halfspeed)
exp A EDP feedback level
exp B RPTR feedback level
Bank 01
01 rec
02 undo
03 trk rec selct
04 trk 1 pitch =0 trk 2 pitch -12
05 trk 3 pitch =0 trk 4 pitch =0
06 trk 1 pitch +2 trk 2 pitch -10
07 trk 3 pitch +2 trk 4 ptich +2
08 BMP&PICH normal
09 reverse
10 EDP reverse (EDP foot controller INSERT ý halfspeed)
exp A EDP feedback level
exp B RPTR BMP&PITCH cc 014 (000 127)
Bank 02
06 Erase Loop
Kindest Regards
Per Boysen