[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Behringer/Repeater (EDP) foot controller
So....let me get this straight. The FCB1010 allows you to assign a CC
message to any one of it's pads? So pad 1 could send a message to the
Repeater that says, "set feedback to 50%"? If so, that would be SWELL!
I've struggled trying to use a Yamaha MFC10 and an RFX MIDI Wizard with
much
frustration.
Mark Sottilaro
on 2/10/02 3:51 AM, Per Boysen at per@boysen.se wrote:
> Hi,
>
> I also got one of these new Behringer FCB1010, and I must say I like it a
> lot. Thanks to David Auker I finally understood how to assign many midi
> commands to the same foot pedal and this opened up a lot of
>possibilities.
> Unfortunately you can only set midi channels globally. In my case this
>means
> I have to dedicate some pedals for the EDP and have the rest for
>Repeater.
> But I can live with that.
>
> Oh, and one bug I found out after a lot of head ace: When programming
> Behringer Program Change for the Repeater you have to write the number
>above
> the one you want. As an example, Repeater records on midi PC 3, which
>means
> I have to program the Behringer pedal to send "midi PC 4".
>
> Ok, anyway, here's what I've set up sofar for rehearsals:
>
>
> Bank 00
> 01 rec trk 2 -12
> 02 undo trk3 pitch =0
> 03 trk rec selct
> 04 loop down
> 05 loop up
> 06 multiply
> 07 trk 2 pitch -12
> 08 trk 3 pitch+12
> 09 reverse
> 10 EDP reverse (EDP foot controller INSERT ý halfspeed)
> exp A EDP feedback level
> exp B RPTR feedback level
>
>
> Bank 01
> 01 rec
> 02 undo
> 03 trk rec selct
> 04 trk 1 pitch =0 trk 2 pitch -12
> 05 trk 3 pitch =0 trk 4 pitch =0
> 06 trk 1 pitch +2 trk 2 pitch -10
> 07 trk 3 pitch +2 trk 4 ptich +2
> 08 BMP&PICH normal
> 09 reverse
> 10 EDP reverse (EDP foot controller INSERT ý halfspeed)
> exp A EDP feedback level
> exp B RPTR BMP&PITCH cc 014 (000 127)
>
>
> Bank 02
> 06 Erase Loop
>
>
> Kindest Regards
>
> Per Boysen
>