[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: EDP hardware (2 EDPs)
>
> > good to hear. I'm think about investing in another EDP. are you
>going stereo
>> or serial with your EDP's?
>>
>> br, Pedro
>
>Parallel. My plan (not yet hooked up) is to Y-cable the send to the EDPs
>and
>then bring them back on separate channels into the mixer. My plan is to
>only
>record to one at a time. With a certain amount of mixer fiddling, that
>configuration should actually allow me to send from one EDP to the other.
>
>I'd originally figured that if I were getting a second EDP, it would be
>for
>stereo. Now that I've got a reasonable mixer, I'm finding that stereo
>loops
>aren't as critical since I've got other things going on that can stereoize
>the signal.
>
>Stereo mixboard sends are also a pain to manage in my experience. The one
>effect that I am running in stereo is my DL8000R because I want to take
>full
>advantage of crossfeed delay effects. To do that, however, I'm using one
>of
>my submixes.
I just set up for this again. I had it years ago and was not quite
ripe, musically.
And just like you, I thought stereo was more important, and now
changed my mind.
Do you use just one Pedal board, switched?
I just feel like having the FB controlled for both simultaneously,
sometimes, or Mute, but not Overdub... the solution may be MIDI once
again...
--
---> http://Matthias.Grob.org