[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

RE: VORTEX knobs and pots



Yes, that's possible, because sometimes the values de/increment in
bigger steps then +/-1, like they're jumping. So programming and
adjusting sounds is quite incomfortable. Thanks for that advice.
 


> -----Original Message-----
> From: Loopers-Delight-request@loopers-delight.com 
> [mailto:Loopers-Delight-request@loopers-delight.com] On 
> Behalf Of James Winger
> Sent: Samstag, 18. Januar 2003 19:54
> To: Loopers-Delight@loopers-delight.com
> Subject: Re: VORTEX knobs and pots
> 
> 
> These aren't actually pots - they are rotary encoders (every 
> time you feel 
> that click, the little switch in there kicks over and 
> triggers the unit to 
> increment)
> 
> 
> The encoders in the vortex are a known weak point and they 
> should probably 
> be replaced.
> 
> On the up side, Lexicon is very good about sending replacements.
> 
> The vortex breaks apart very very easily and installing new 
> encoders is a 
> short little job if you have basic soldering skills)
> 
> 
> 
> 
> 
> 
> 
> From: "Fabian Petersen" <fabpet@web.de>
> Reply-To: Loopers-Delight@loopers-delight.com
> To: <Loopers-Delight@loopers-delight.com>
> Subject: VORTEX knobs and pots
> Date: Sat, 18 Jan 2003 17:16:37 -0600
> MIME-Version: 1.0
> Received: from mc5-f21.law1.hotmail.com ([65.54.252.28]) by 
> mc5-s10.law1.hotmail.com with Microsoft 
> SMTPSVC(5.0.2195.5600); Sat, 18 Jan 
> 2003 15:17:50 -0800
> Received: from hemlock.violacea.com ([207.228.238.9]) by 
> mc5-f21.law1.hotmail.com with Microsoft 
> SMTPSVC(5.0.2195.5600); Sat, 18 Jan 
> 2003 15:17:50 -0800
> Received: (from looper@localhost)by hemlock.violacea.com 
> (8.9.3/8.9.3) id 
> SAA26276;Sat, 18 Jan 2003 18:17:28 -0500
> Resent-Date: Sat, 18 Jan 2003 18:17:28 -0500
> Old-Return-Path: <fabpet@web.de>
> Message-ID: <000901c2bf47$a7ddf640$d427c8cd@FABIAN>
> X-Priority: 3 (Normal)
> X-MSMail-Priority: Normal
> X-Mailer: Microsoft Outlook, Build 10.0.2616
> Importance: Normal
> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106
> Sender: fabpet@web.de
> Resent-Message-ID: <UFu_PD.A.faG.ICeK-@hemlock.violacea.com>
> Resent-From: Loopers-Delight@loopers-delight.com
> X-Mailing-List: <Loopers-Delight@loopers-delight.com> 
> archive/latest/28835
> X-Loop: Loopers-Delight@loopers-delight.com
> Precedence: list
> Resent-Sender: Loopers-Delight-request@loopers-delight.com
> Return-Path: Loopers-Delight-request@loopers-delight.com
> X-OriginalArrivalTime: 18 Jan 2003 23:17:50.0393 (UTC) 
> FILETIME=[D1D75A90:01C2BF47]
> 
> The pots on my Vortex seem to be worn out. First, they feel 
> "loose", the steps don't seem to be very precise. Second, the 
> pot to step through the parameters seems to be worst. If I 
> try to select a certain parameter to change it, the display 
> isn't showing it's actual value. Sometimes it stays the same, 
> sometimes it needs two steps forward, one step back, to get 
> the actual parameter value displayed. I assume it is the pot. 
> Or is this behaviour familiar to any other Vortex users?
> 
> 
> _________________________________________________________________
> The new MSN 8: smart spam protection and 2 months FREE*  
> http://join.msn.com/?page=features/junkmail
>