Re: quick question

[Kim Flint <kflint@loopers-delight.com>]

At 07:44 PM 8/20/2003, S.M.C Butler wrote:
>  for some reason i can't get the reverse function to work on my edp 
> running loop iv. can someone run me through the sequence
>of operations to get this to work from the default startup condition 
>(preferably using my footswitch).

If you want to use the footpedal, then you want to set the InsertMode 
parameter to be Reverse. This changes the Insert button into the Reverse 
button.

Parameter button to the "Buttons" row. (or "keys" in older units). Press 
Insert for InsertMode parameter, until is shows "REV". then press 
Parameter 
button a few times to get back to play mode and you are set.

Of course, you can also use MIDI to access any command at any time.

kim



______________________________________________________________________
Kim Flint                     | Looper's Delight
kflint@loopers-delight.com    | http://www.loopers-delight.com