[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

RE: quick question




Speaking of which: I managed to get the EDP reliably into "Load" mode via
MIDI-Commands.
To get it back to Play mode I "press" the Parameter button for 500 ms (via
MIDI). This works for all settings except "Load" and "Dump".
Can anybody give me a hint here?

Thanks
Bernhard


> -----Original Message-----
> From: Kim Flint [mailto:kflint@loopers-delight.com]
> Sent: Donnerstag, 21. August 2003 06:37
> To: Loopers-Delight@loopers-delight.com
> Subject: Re: quick question
>
>
> At 07:44 PM 8/20/2003, S.M.C Butler wrote:
> >  for some reason i can't get the reverse function to work on my edp
> > running loop iv. can someone run me through the sequence
> >of operations to get this to work from the default startup condition
> >(preferably using my footswitch).
>
> If you want to use the footpedal, then you want to set the InsertMode
> parameter to be Reverse. This changes the Insert button into the Reverse
> button.
>
> Parameter button to the "Buttons" row. (or "keys" in older units). Press
> Insert for InsertMode parameter, until is shows "REV". then press
> Parameter
> button a few times to get back to play mode and you are set.
>
> Of course, you can also use MIDI to access any command at any time.
>
> kim
>
>
>
> ______________________________________________________________________
> Kim Flint                     | Looper's Delight
> kflint@loopers-delight.com    | http://www.loopers-delight.com
>