[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: EDP Feedback and Volume Pedal
At 01:24 PM 4/16/2006, Kevin wrote:
>I'm having a little problem with the Ernie Ball volume pedal I have
>plugged into the Feedback jack at the back of the EDP. Whenever I adjust
>the feedback using the pedal, it seems to take a little while for the EDP
>to notice that I'm moving the pedal and adjust the feedback accordingly.
Make sure you are using the correct type of pedal. It should be a volume
pedal intended for line level signals, where the pot is around 20kOhm. If
you are using a volume pedal intended for guitar the resistance will be
too
high, around 250kOhm. Most of the range of the pedal will not be
recognized. So you may have to move through a lot of the pedal range
before
you reach the point where the EDP recognizes it.
See the Echoplex pedal tutorial for a lot more details:
http://www.loopers-delight.com/tools/echoplex/echopedals.html
Also, make sure you understand what feedback is and how it works. You
won't
hear the result of a feedback change until the next repetition of the loop.
However, if you are using LoopIV some of the interface modes provide
interesting variations on this. You may want to explore those after you
get
the idea of basic feedback control.
>I also notice that if I swoop the pedal a couple of times to get
>the feedback change noticed, there is also a accompanying swoop in the
>volume leve of the loop I'm recording. Has anyone else had this
>happen? If so, how did you deal with it?
As Bill explained, Feedback is a dynamic control. It is always affecting
the level fed back into the loop. Active motions you make on feedback will
be heard in the next repetitions of the loop.
kim
______________________________________________________________________
Kim Flint | Looper's Delight
kflint@loopers-delight.com | http://www.loopers-delight.com