[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: EDP Feedback and Volume Pedal
> At 01:24 PM 4/16/2006, Kim wrote:
> Make sure you are using the correct type of pedal. It should be a volume
> pedal intended for line level signals, where the pot is around 20kOhm. If
> you are using a volume pedal intended for guitar the resistance will be
>too
> high, around 250kOhm. Most of the range of the pedal will not be
> recognized. So you may have to move through a lot of the pedal range
>before
> you reach the point where the EDP recognizes it.
Bingo! That's what's happening. Thanks, Kim!
Cheers,
Kevin
www.TheNettles.com