[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Looping stuff for Mac....
>> I'm checking out the Kaiserlooper here now but no audio gets
>> looped. The "DSP Status" window shows the correct settings for my
>> G5 and Multiface audio interface. I can monitor the Multiface
>> separately and I can see that no audio is being piped from the
>> software to the physical output. Should there be some graphic
>> indication in Kaiserlooper on what's going on?
On 27 aug 2006, at 00.00, Jeff Kaiser wrote:
>
> Hi Per,
>
> Awesome! somebody tried it....oh....and it didn't
> work....hmmmm....bummer... :-)
> There are three places you should see activity:
> Is there any input level being shown on the LED under "input level?"
> And is anything showing at the LEDs under the "Master Volume?"
> Then, when you loop, there should be indication under the
> particular loop strip that there is level there when you raise the
> fader.
>
> Just curious, what is the CPU Usage reading under the on switch?
> And maybe not so clear, play of the loop starts when you release
> the record button
>
> Thanks, so much, Per!
The CPU Usage meter does flicker between 2 and 3. Both in the main
mixer window and the smaller "CPU Utilization" box of the DSP Status
window. This is on a 2x2 GHz G5 with 2 GB ram. Still no signs of any
activity inside the Kaiserlooper though.
Greetings from Sweden
Per Boysen
www.boysen.se (Swedish)
www.looproom.com (international)
http://tinyurl.com/fauvm (podcast)
http://www.myspace.com/looproom