[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Looping stuff for Mac....
Do you have max? I'm curious if the max patch itself would work on your
machine.....
Jeff Kaiser
http://www.JeffKaiser.com
pfMENTUM.com • AngryVegan.com
On Aug 26, 2006, at 3:18 PM, Per Boysen wrote:
>>> I'm checking out the Kaiserlooper here now but no audio gets looped.
>>> The "DSP Status" window shows the correct settings for my G5 and
>>> Multiface audio interface. I can monitor the Multiface separately
>>> and I can see that no audio is being piped from the software to the
>>> physical output. Should there be some graphic indication in
>>> Kaiserlooper on what's going on?
>
> On 27 aug 2006, at 00.00, Jeff Kaiser wrote:
>>
>> Hi Per,
>>
>> Awesome! somebody tried it....oh....and it didn't
>> work....hmmmm....bummer... :-)
>> There are three places you should see activity:
>> Is there any input level being shown on the LED under "input level?"
>> And is anything showing at the LEDs under the "Master Volume?"
>> Then, when you loop, there should be indication under the particular
>> loop strip that there is level there when you raise the fader.
>>
>> Just curious, what is the CPU Usage reading under the on switch? And
>> maybe not so clear, play of the loop starts when you release the
>> record button
>>
>> Thanks, so much, Per!
>
>
> The CPU Usage meter does flicker between 2 and 3. Both in the main
> mixer window and the smaller "CPU Utilization" box of the DSP Status
> window. This is on a 2x2 GHz G5 with 2 GB ram. Still no signs of any
> activity inside the Kaiserlooper though.
>
> Greetings from Sweden
>
> Per Boysen
> www.boysen.se (Swedish)
> www.looproom.com (international)
> http://tinyurl.com/fauvm (podcast)
> http://www.myspace.com/looproom
>
>
>