[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

RE: workaround for gap in first loop? (was: Boss RC50 delay issues)



I've seen a lot of complaints about the RC-50 on this list. Imo the issue 
is caused by the loop quantize feature and infact it's documented in the 
1.01 OS release notes. But if you carefully read the release notes the 
workaround is not to use the rhythmn mode. Let's first take a good look at 
the release notes.

-----
* Priority Given to Rhythm (Factory Default) *
This preserves the performance rhythm from the time that recording started.
When you operate the pedal, the performance-start location is adjusted and 
playback is started accordingly. Although it may sometimes sound as if 
playback has started from the middle of a phrase, from the following loop, 
playback takes place as recorded.

* Priority Given to Sound *
This starts playback from the beginning of the recorded data.

Note, however, that for the rhythm guide, recorded phrases, or recordings 
synchronized with MIDI, playback starts with “Rhythm Priority.”
-----

What you have to do is this:
- put your RC-50 in Sound Priority mode (see release notes for details)
- do NOT use the Rhythm guide; this will turn the loop quantize feature on 
and causes the gap

Btw: I've tested the issue 25 times today and imo above procedure avoids 
the problem. I hope this helps :)

Sjaak
---
Scarlet One, ADSL 6 Mbps + Telefonie, vanaf EUR 29,95...
http://www.scarlet.be/