[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: EDP Set Tempo Click Track



afaik you have the settings correct,
and that's what the beatsync does.
(except that it actual sends a click once per cycle rather than once per 
loop)

the EDP can output a Midi Note for every beat,

I'll look up the details if that would help.

Other way to do it:-
(there usually is one)

1) set 8th/cycle to 2 (for quarter notes)
2) set your tempo
3) Record your loop rather carefully to get the right time sig.

andy butler


Donearlsto wrote:
> Hello all,
> According to the manual, after setting a tempo via SetTempo, a signal is 
> sent out of the Beat Sync Jack that can act as a "click track."  When I 
> do this, however, all I get is a click at the start of each loop cycle, 
> not for each beat.  Is there a way to send the "click" for each quarter, 
> rather than only at the beginning of each cycle?   Perhaps I have a 
> setting incorrect? Any help is appreciated.
>  
> Donovan Stokes
> ------------------------------------------------------------------------
> Get the MapQuest Toolbar 
> <http://www.mapquest.com/toolbar?NCID=mpqmap00030000000003>, Maps, 
> Traffic, Directions & More!