Re: Programming the FCB1010 for the EDP (Karma)

[andy butler <akbutler@tiscali.co.uk>]

hi Phillip

You can use CC to operate an EDP,
but using the fcb1010 gives limited results,
as the edp needs the CC equivalent of Note-Offs 
if you're going to get the same results.

i.e. if when you released he switch you 
could send the corresponding CC with a value of 0 then all would be
well, thus giving you all the needed LongPress and ShortPress functions.
...but the fcb doesn't do that 


Just sending the first CC on it's own always gives you LongPress,
...so every time you try Record, you get a Reset :-(


As fcb can send 2 CCs, you could program in a ShortPress,
by sending the CC of value 0 immediately after the CC for the function.
..but problem is you have to program another switch if you want the 
LongPress at all.  

Lack of EDP3 response....check the fcb global midi channel for the CCs.


Conclusion...it doesn't work that well :-(

Suggestion...use a Midi Router instead. Andre Lafosse controlled 5 edps 
with one of those.

Or..Get the Uno firmware upgrade for you fcb which solves the CC problem. 


andy butler

phillip wilson wrote:
> Hi Erland..and all...
>  
> Heres a deal for you....Erland, I will email u offlist and work this 
> through with u, I have two EDPs up and running with the FCB 
> perfectly..Im confident I can get u up and running.
>  
> HERES THE CATCH EVERYONE ELSE----
> Will someone further up the ladder in EDP usership help ME!!!
>  
> I need to control 3 EDPs of one Behringer FCB1010....
> so  far I can get two to play using notes and offsets of 0 and 48 on 
> Channel 1...........but if I try to add the same commands for EDP3 I run 
> out of midi notes at the top end (would need 137) If i bunch the offsets 
> closer together there seems to be cross talk between the desired 
> function on EDP3 and some undesired function on EDP2 due to overlap.
>  
> I am therefor hoping I can use FCB1010 with the edp set to CTR instead 
> to grab them last buttons, however at the moment I cant get any reaction 
> at all out of EDP3
>  
> It is still set to channel 1 same as the notes  and I have brought the 
> offset back to 0 seeing as we are using CTR's so there shouldnt be any 
> miss-infomations (right???) basically if you have made an EDP work using 
> a behringer FCB1010 and CTR's I would love to hear from you.
>  
> Pay It Forward
>  
> Phill
> 
>  > Date: Mon, 21 Apr 2008 19:20:09 +0200
>  > From: perboysen@gmail.com
>  > To: Loopers-Delight@loopers-delight.com
>  > Subject: Re: Programming the FCB1010 for the EDP
>  >
>  > On Mon, Apr 21, 2008 at 6:28 PM, Erland <erlandka2@gmail.com> wrote:
>  > > Is there a guide out there to programming the FCB1010 for use with 
> the EDP
>  > > other than the Behringer and Echoplex manuals?
>  > > I've already given up a few times even though I find myself quite
>  > > technically minded.
>  > >
>  > > I'm mostly interested in the granular functions and feedback pedal 
>as I
>  > > already have the Gibson and Digitech footcontrollers.
>  > >
>  > >
>  > > Thanks much,
>  > >
>  > > Erland
>  >
>  >
>  > Try searching the archives of this list! The topic has been up many
>  > times. I bet you will find at least three good guides ;-)
>  >
>  > --
>  > Greetings from Sweden
>  >
>  > Per Boysen
>  > www.boysen.se (Swedish)
>  > www.looproom.com (international)
>  > www.stockholm-athens.com
>  >
> 
> 
> ------------------------------------------------------------------------
> Try Messenger on your mobile. Text MSN to 63463 Now. 
> <http://mobile.uk.msn.com/pc/messenger.aspx >