Re: Sooperlooper or Mobius? Going back to software.

["L.Angulo" <labaloops@yahoo.com>]

suggested latency is 5 and it reports 256 but when i do calibrate latency 
it shows 360
right now i have set to 360 i am going to play for a while with that see 
how it behaves
i had tried 256 and even 128 in the past but it felt heavier and 550 felt 
allright
But lets see how it does with 360
thanx!

www.myspace.com/luisangulocom


--- On Wed, 1/14/09, Jeffrey Larson <jeff@zonemobius.com> wrote:

> From: Jeffrey Larson <jeff@zonemobius.com>
> Subject: Re: Sooperlooper or Mobius? Going back to software.
> To: "Loopers Delight" <Loopers-Delight@loopers-delight.com>
> Date: Wednesday, January 14, 2009, 12:02 PM
> > suggested latency millisecs. 5
> > override input latency frames 550
> > override output latency frames 550
> 
> The way you specify the buffer size in Mobius is more
> flexible than it needs
> to be and hard to use.  If you are going to change the two
> override
> values they should be near the ideal values implied by the
> suggested latency.
> 5ms of latency is closest to a buffer size of 256 frames
> (frames are pairs of
> stereo samples).  So the override values should be near
> 256.  You have
> them twice as high as they normally would be, try setting
> both to 256 and
> see if that helps.
> 
> I also read conflicting information about how the audio
> interface
> software I use on the Mac handles the latency suggestion. 
> Some
> comments indiciate that it ignores it and always uses 2.5
> for a
> resulting buffer size of 128 frames.  I haven't had a
> chance to verify
> this but if 256 doesn't feel quite right try 128.
> 
> Jeff