[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: ableton / mobius -- no sound?
could it be because i'm inputting a mono instrument?
On September 14, 2011, at 2:25 PM, Simeon Harris wrote:
> i'm not sure - i don't know why your audio in says "left out" on all
> the mobius channels. it should say 3/4 Mobius, 5/6 Mobius etc etc...
>
> On Wed, Sep 14, 2011 at 7:13 PM, Lev 'Ljova' Zhurbin <ljova@ljova.com>
> wrote:
>> Sim, thank you!
>>
>> I think I've duplicated your setup, but still no luck here.
>> take a look if you can -- what is wrong here?
>>
>> warmly,
>> Ljova
>>
>> --
>> Lev 'Ljova' Zhurbin
>>
>> Web: http://Ljova.com
>> Listen: http://www.Ljova.com/demos
>> Watch: http://Ljova.com/videos
>> IMDb: http://imdb.me/ljova
>> Follow: http://twitter.com/ljovadotcom
>>
>>
>> On Wed, Sep 14, 2011 at 5:26 AM, Simeon Harris
>> <simeonharris40@googlemail.com> wrote:
>>>
>>> i think i see the problem
>>>
>>> mobius is set up by default to pass no audio through, as it's assumed
>>> you're running it in parallel
>>>
>>> you either need to monitor your direct signal directly from your
>>> interface, or pass it through via a send to the master out
>>>
>>> here's a pic of how i have mine set up. the audio from each mobius
>>> channel is routed to the sends only, so that i can pass it to a bus
>>> which goes directly out, or to another bus that has plugins on it
>>>
>>> http://www.simeonharris.co.uk/misc/mobiusableton.jpg
>>>
>>> hope that helps - if not, i'll try to provide a more detailed
>>> step-by-step description
>>>
>>> sim
>>>
>>> On Tue, Sep 13, 2011 at 9:36 PM, Lev 'Ljova' Zhurbin <ljova@ljova.com>
>>> wrote:
>>>> Dear Loopers,
>>>>
>>>
>>>> I'm trying to make Mobius work with Ableton, and seem to have it all
>>>> set
>>>> up
>>>> right, but somehow I'm not getting to hear any sound.
>>>
>>
>>