Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: rolling your own



My recommendations would be to use a decent mixer to combine signals if 
you can.  I use a small 3 stereo channel mixer in the back of my rack 
to feed my Repeater when I do gigs and it works great.

Mark

On Thursday, May 8, 2003, at 02:38  PM, Jonathan El-Bizri wrote:

>  
> Killer!
>  
> Thanks all.
>  
> Another question: As I mentioned, I need to combine multiple outputs 
> into an input. So far, I've been doing this with female input 
> y-cables, which I have read in more than one place, is a Really Bad 
> Idea, since you are feeding the line amp outs of each device into each 
> other. Is this the case?
>  
> I posted to recording.org regarding this and someone responded that 
> the problem could be solved by placing a resistor (I can't remember 
> the size I'm afraid, and recording.org is down) on each output, to 
> bring the power of the signal down to where it could do no damage.
>  
> Is this a feasible solution? Wouldn't this affect the tone of the 
> signal?
>  
> The cables will short - less than a foot or so, so noise and 
> degradation shouldn't been an issue.
>  
> Thanks,
>  
> bIz
>  
> ---------------------
> www.groovetronica.com - "No offense, but a dated d&b loop with some 
> Holiday Inn lounge singer hardly wows me technically or talent wise, 
> and I could do better with a cassette deck and a microphone."
> ---------------------
>
> ----- Original Message -----
> From: anti:clockwise
> To: Loopers-Delight@loopers-delight.com
> Sent: Thursday, May 08, 2003 2:29 PM
> Subject: rolling your own
>
>
>
> hey bIz
>
> hell yeah i make my own. it can be a great way to save money, as well 
> as getting precisely what you need for whatever you need it for, 
> cable-wise.
>
> for example - if you have a bunch of sources that are located 
> physically nearby one another (such as in a rack) why not use a 
> multichannel snake instead of individual runs? my rig has one 6 
> channel snake that Y's into 2 groups of 3 ch's; each of different 
> lengths, terminating in a few different kinds of connectors and 
> servicing both inputs and outputs. one side is connected right to a 
> mixer, man does it save set up time (and for me, that's saying a lot.)
>
> you can do a pretty good job with gepco snake for a job like this and 
> it won't set you back like canare or mogami will.
>
> and get a switchcraft catalog. you wouldn't know how many termination 
> options there are in the world til you see one of these. man, i am SO 
> down with right-angle 1/4" plugs. i get all sexed up just thinking 
> bout em.
>
> if you live near a decent pro-audio house (guitar center does NOT 
> count) they should be able to sell you raw wire (snake, single 
> conductor shielded, whatever you need) by the foot right off the roll. 
> i'm lucky, living in nyc, i just go get. colors, even.
>
> if you're not so well situated for that, a full compass catalog will 
> do almost as nicely. you can get raw wire and connectors from them.
>
> and the smell of solder - don't even START me!
>
> a:c
>
>
> on Thu, 8 May 2003 13:08:37 -0700
> "Jonathan El-Bizri" <ssrndpty@hotmail.com>
> wondered:
>
> Hi,
> I was wondering if anyone had any resources for making your own cables?
> I'm in the process of rebuilding my rack, and would like to do a good 
> job for once. Also, I have a number of specific items I need to create 
> (such as y-cables for mixing two signals - with resistors inline) and 
> making cables seems like a good place to start.
> bIz
>