Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info
[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Ground Control

I just purchased a Digi. Music Corp. "Ground Control" to control my rack 
set
up which consists of a Digitech 2101, Digitech RDS 8000, Lexicon Jamman, 
and
a Mackie 1202VLZ mixer.  I had been controlling the 2101 and Jman (midi 
fade
messages) via a Dgitech Control One Footcontroller but was experiencing 
some
pops etc. when initiating a loop fade while in record mode in the Jman. I
figured this had something to do with the midi message being relayed (?-not
sure if this is technically correct but...) through the 2101 so I aquired 
the
Ground Control so I could treat the 2101/Jman independantly. It worked as 
far
as getting rid of the noise artifacts but the only probem I'm having is 
that
when I hit one of the 2 pedals I assigned to send midi pgm.chg. 10 or 11 to
the Jman I have to tap the pedal twice before the Jman picks up the
message-ie: three vertical lights on display. I have the Ground Control 
midi
out into the 2101 midi in and to the Jman via the 2101 midi through. The 
2101
is configured, in the Ground Control, as device 1 and the Jman as device 2.
Also the version # of the Ground Control is 2.3-is this the most current? I
purchased the unit at a music store that was going out of business and the
sales guy didn't know if it was or not-just currious. Other than that
everything works fine. Ideas? Thanks--Paul (Mindscape Explorer)