Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: FS300 Footswitch Errors with EDP



somehow you have too much impedance in that path otherwise. (could be in
the wiring, the switch, jack, bad solder joints, etc.)  Try lower value
resistors until it works.
kim

>Greetings--
>I got the resistors from Digikey and wired them in, but I still get the 
>same
>error.  Here it is:
>When controlling the Echoplex Digital Pro from the FS300 footswitch, the
>multiply switch occasionally also triggers the overdub.  Sometimes it does
>this instead of multiplying.  The resistor in question is a 7.87K 1/4W 1%
>metal film.  Is there any hope for this setup or do I need to go back to 
>the
>EDP footswitch?
>Gary


______________________________________________________________________
Kim Flint                     | Looper's Delight
kflint@loopers-delight.com    | http://www.loopers-delight.com