Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: MoFx part 2 (and Repeater midi implementation)

If you plug a footswitch into one of the CV inputs of the midi rolls, it'll
output 0 for off and 127 for on, (or vice versa)
Is that what you need ?


> Yeah, I'm having the same problem you are.  If only the Midiwizard
> allowed you to associate a CC# and value for a footswitch...  I looked
> at the Yamaha, but didn't get it as money was tight.  Other than that,
> the Midiwizard is a fine value.  Seems to me the Repeater's midi
> implementation could be better.  Does anyone really need to be able to
> access over a thousand loops from the floor?  With a 128 meg CFC, that
> would give you about .026 seconds per single track loop.  I think users
> would be much better served if you could just control 100 or so loops.
> Still seems like plenty of loops to me.
> Mark Sottilaro
> rich wrote:
> > me again,
> >
> > i am currently using a Rolls MidiWizard to control my jamman.  and i
> > (finally) got the pedal programmed so the controlling switches are
> > laid out how i want them, rather than dancing all over the place.
> > thanks to luca for pointers on that from a few months ago...
> >
> > now, i'd like to control the mofx from the same pedal board.  on the
> > Rolls, i can map program changes to different channels, but the mofx
> > seems to implement a lot of 0-63=off and 64-127=on type commands on
> > specific control numbers.  The Rolls doesn't seem to be sophisticated
> > enough to do this (am i correct here?).
> >
> > yep, kim, you're right....i need a better midi pedal....but....this
> > is what i gots for the moment.
> >
> > so, my question is: which currently manufactured midi pedal will
> > allow me to have switches that will turn parameters of the mofx (or
> > other units....like Repeater, perhaps) on and off with these
> > controller commands.
> >
> > I won't be searching for a pmc-10.  Will the Yamaha MFC-10 do this?
> > I'm pretty sure the Rocktron All Access will, but that one seems the
> > priciest of the bunch.
> >
> > Anybody have a specific midi pedal hooked up to a MoFx?
> >
> > best,
> >
> > rich