Support
Looper's Delight
|
Support |
|
|
Ah Gary Always so enthousiastic :=) we're fighting the last problems.... the doc. it leans towards the end but we dont know when yet Cheers Claude Gary Lehmann wrote: > > Hey guys-- > Check it out--the new OS is going to have PRESETS! Sysx is swell but it > looks like you can store your options in slots and call them up with >program > changes. I call that real good news. (EDP finally using p ch!) > I can't wait for this!!!! > Gary > > -----Original Message----- > From: jim palmer [mailto:jimp@pobox.com] > Sent: Tuesday, February 19, 2002 11:08 AM > To: Loopers-Delight@loopers-delight.com > Subject: Re: SV: A New EDP Bein' Born > > could you explain why sysex is more flexible and more efficient? > it seems like it will be more difficult to program a pedal. > won't we have to enter binary data for each switch? > and aren't midi controller's designed for just this purpose? > > ----- Original Message ----- > From: "Kim Flint" <kflint@loopers-delight.com> > To: <Loopers-Delight@loopers-delight.com> > Sent: Tuesday, February 19, 2002 4:05 AM > Subject: Re: SV: A New EDP Bein' Born > > > At 11:51 PM 2/18/2002, Per Boysen wrote: > > > > Från: Matthias Grob [mailto:matthias@grob.org] > > > > > > >> > As if 8th/Cycle would be accessible via midi? > > > >>> (that's a no-brainer for my wish list ;-) > > > >> > > > >>You mean other than the current implementation? Because all front > panel > > > >>functions are accessable via MIDI. > > > >> > > > >>By adjusting the 8ths/beat (via front panel, custom footswitch, or > > > MIDI) you > > > >>can adjust the rate at which the EDP emits MIDI sync pulses. > > > > > > > Thanks to Claude, in the upgrade, this 8th/beat change only happens > > > > at the first loop end after you come back from parameter state. >With > > > > this, you dont jump arround timings and keep the beat one in >relation > > > > to the slaved sequencer. > > > > > > >>I understood that in the Update many of these parameters will have > > > dedicated > > > >>midi cc #s...? > > > > > > > > uh, no, we thought that Sysex is more efficient! > > > > -- > > > > > >Do I get this right now? To be able to change 8th/cycle, while >playing, > you > > >have to use a midi pedal board that is capable of sending sysex when a > pad > > >is pressed? > > >(not the same as "doing a sysex dump of program parameters") > > > > one way is sysex control of individual parameters. If your pedal can't >do > > that it's lame, get a real pedal. sysex is the most flexible approach. > > > > 2nd way is using the new presets feature with a different setting in >each > > one, then use midi program change commands to change it on the fly. > > > > 3rd is what you have already, use midi to virtually press the front >panel > > buttons to edit a parameter. Kind of awkward, but you can sequence the > > presses to go quickly. > > > > kim > > > > > > > > ______________________________________________________________________ > > Kim Flint | Looper's Delight > > kflint@loopers-delight.com | http://www.loopers-delight.com > >