Boomerang V2 Mode AB1 questions

["Dennis Leas" <dennis@mdbs.com>]

So all you 'rangers out there, I have just a few more questions about the
Boomerang.

These are about mode AB1:

1) Does the 'rang switch to Loop A whenever Loop B finishes playback?

For example, say that you've recorded into Loop A and B.  You stop playback
and press ONCE (A/B)  so that 'b' is illuminated.  When you press PLAY, 
Loop
B starts playback.  At the end of Loop B, does the 'rang automatically
switch to Loop A playback?

For another example, say you do the following:
a) Record into Loop A.  Terminate the recording by pressing ONCE (A/B).

b) Continue recording into Loop B.  Terminate the recording by pressing
RECORD.

c) Loop B start to playback.

At the end of Loop B, does playback automatically switch to Loop A?



2) Say that Loop B is playing back.  You have only three ways to stop Loop 
B
playback.
a) If you don't press any buttons, at the end of Loop B playback Loop B 
will
automatically switch to Loop A .

b) You can press PLAY, which will immediately stop Loop B playback and idle
the 'rang.

c) You can press RECORD, which will immediately start recording into Loop 
B.



My thanks for any and all help.

Dennis Leas
-------------------
dennis@mdbs.com