Re: Loopers-Delight-d Digest V02 #534

[SoundFNR@aol.com]

> > Set the Loop/Delay parameter to .InP.
>  >
>  > Now you can simulate all the EDP InterfaceModes with your feet.
>  > (apart from the Stutters)
>  > Placing your foot on both FCB1010 pedals gives you ReplaceMode.
>  > Working the FCB1010 feedback pedal opposite to the input pedal
>  > gives you FlipMode (easier sitting down)
>  
>  
>  Fun indeed--except for the input vol control, you can do this in 
>loopmode
>  too, no?

Well, there's nothing to stop you using an ordinary swell ped before
the EDP.

The EDP footpedal allows you to control Input Volume to the loop
in Inp.  and DEL  modes . The "dry" signal is unnaffected.

In FlipMode you control Input, but also Feedback(reversed).

The thing you can't do with the EDP is control Input Vol by MIDI,
as the hardware just won't do it.

andy butler