Re: More EDP sync problems

[Geoff Smith <geoff.smith15@btopenworld.com>]

 yep 
controlsource is not set to off
thanku for trying to help
Geoff

on 3/6/03 12:38 am, Doug Cox at dougcox@pdq.net wrote:

> Oops.  Two things:
> 
> 1) I see in your note that you made sure Sync=Out.  Sorry, didn't mean to
> imply that you hadn't.
> 
> 2) The next, onliest thing I can think of comes from reading the 
>manual...
> "Sync=Out... MIDI clocks are sent out the MIDI Out port, **provided
> ControlSource is not OFF**.
> 
> I didn't even know that.  Is your ControlSource set to OFF on the LoopIV
> machine?
> 
> Now I'm really out of ideas.
> 
> Doug
> ----- Original Message -----
> From: "Geoff Smith" <geoff.smith15@btopenworld.com>
> To: <Loopers-Delight@loopers-delight.com>
> Sent: Monday, June 02, 2003 6:18 PM
> Subject: Re: More EDP sync problems
> 
> 
>> It gets weirder I have just beat synced the two echoplex's and the mpc
> locks
>> to the loopIII which is locked to the loopvi, why can't I just do it 
>from
>> the loopvi ??????????
>> Totally and utterly confused.
>> geoff.
>> 
>> on 2/6/03 11:57 pm, Geoff Smith at geoff.smith15@btopenworld.com wrote:
>> 
>>> ARGH!
>>> I have been trying to get my Akai MPC to sync to the midi clock of my
> edp
>>> loopIV
>>> that i have a pre-recorded loop I like on.
>>> However all is not going well.
>>> as the Mpc is not being triggered by the EDP.
>>> 
>>> I have tested the mpc.
>>> When using logic (transmit midi clock) the mpc starts when i press play
> and
>>> reads the midi clock and then loops along in sync perfectly. Therefore
> the
>>> mpc is responding to midi sync fine.
>>> Okay so this leaves the edp.
>>> When i connect my EDP loop iv with sync set to out the mpc does
> nothing!!
>>> and if I press play on the mpc it simply plays the sequence at its
> original
>>> tempo and not the tempo of the edp. So how do you get a sequencer to
> sync to
>>> the edp when u have already recorded the loop before?
>>> How to you send a start sequence command to the mpc like what happens
> when i
>>> press play on logic.
>>> ARGHH!
>>> bizarrely if i connect up my loopIII edp and create a loop the mpc 
>jumps
>>> into play and syncs beautifully. So how do you sync to a loop u 
>recorded
>>> earlier????
>>> This is driving me up the twist.
>>> 
>>> At this rate i am gonna give up with the edps and use the psp42.
>>> Damm Damm damm
>>> I must be missing something obvious.
>>> Can anyone help???
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>> 
>