Support
Looper's Delight
|
Support |
|
|
At last it works!!! sorry for my stupidity. Geoff on 3/6/03 1:31 am, Geoff Smith at geoff.smith15@btopenworld.com wrote: > yep > controlsource is not set to off > thanku for trying to help > Geoff > > on 3/6/03 12:38 am, Doug Cox at dougcox@pdq.net wrote: > >> Oops. Two things: >> >> 1) I see in your note that you made sure Sync=Out. Sorry, didn't mean >to >> imply that you hadn't. >> >> 2) The next, onliest thing I can think of comes from reading the >manual... >> "Sync=Out... MIDI clocks are sent out the MIDI Out port, **provided >> ControlSource is not OFF**. >> >> I didn't even know that. Is your ControlSource set to OFF on the LoopIV >> machine? >> >> Now I'm really out of ideas. >> >> Doug >> ----- Original Message ----- >> From: "Geoff Smith" <geoff.smith15@btopenworld.com> >> To: <Loopers-Delight@loopers-delight.com> >> Sent: Monday, June 02, 2003 6:18 PM >> Subject: Re: More EDP sync problems >> >> >>> It gets weirder I have just beat synced the two echoplex's and the mpc >> locks >>> to the loopIII which is locked to the loopvi, why can't I just do it >from >>> the loopvi ?????????? >>> Totally and utterly confused. >>> geoff. >>> >>> on 2/6/03 11:57 pm, Geoff Smith at geoff.smith15@btopenworld.com wrote: >>> >>>> ARGH! >>>> I have been trying to get my Akai MPC to sync to the midi clock of my >> edp >>>> loopIV >>>> that i have a pre-recorded loop I like on. >>>> However all is not going well. >>>> as the Mpc is not being triggered by the EDP. >>>> >>>> I have tested the mpc. >>>> When using logic (transmit midi clock) the mpc starts when i press >play >> and >>>> reads the midi clock and then loops along in sync perfectly. Therefore >> the >>>> mpc is responding to midi sync fine. >>>> Okay so this leaves the edp. >>>> When i connect my EDP loop iv with sync set to out the mpc does >> nothing!! >>>> and if I press play on the mpc it simply plays the sequence at its >> original >>>> tempo and not the tempo of the edp. So how do you get a sequencer to >> sync to >>>> the edp when u have already recorded the loop before? >>>> How to you send a start sequence command to the mpc like what happens >> when i >>>> press play on logic. >>>> ARGHH! >>>> bizarrely if i connect up my loopIII edp and create a loop the mpc >jumps >>>> into play and syncs beautifully. So how do you sync to a loop u >recorded >>>> earlier???? >>>> This is driving me up the twist. >>>> >>>> At this rate i am gonna give up with the edps and use the psp42. >>>> Damm Damm damm >>>> I must be missing something obvious. >>>> Can anyone help??? >>>> >>>> >>>> >>>> >>>> >>>> >>> >> >