Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

SV: Echoplex w/drum machine question



> -----Ursprungligt meddelande-----
> Från: Terry Blankenship [mailto:electricgypsys@yahoo.com] 

> (I have quantize on and set to LOP, 8th cycle is set
> to 8, and sync is set to out, switch quant is off.I
> set the tempo to 140.)

I'm not sure I understand exactly what you want to do, but did you try
with switch quant set to some value?
 
> I tried setting the half speed button to a parameter
> with double the value of everything else and it did
> keep the drum machine at the same speed when I hit
> half speed but, If I hit half speed again later to
> return it to normal speed, the drum machine doubles
> it's speed. 

To use this workaround you need to program two different foot switch
commands:

1) HalfSpeed/PC with 16 8th/cycle
2) FullSpeed/PC with  8 8th/cycle

You can not use the "speedbutton" command. 
 
> It is also out of sync. 

...switch quant?  ;-)

> Are any of you out there able to use all of the
> functions in the echoplex and keep a drum machine
> going steady and in time for 10 minutes without
> drifting, and without going schizoid when you hit any
> button besides overdub?

If that's what you want it might be a good idea to put the drum machine
as master and slaving the EDP? But then, this thread has been all about
using the EDP as master with a slaved drum machine, or am I mistaken
here?

All the best

Per Boysen