Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info
[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Syncing my Echoplex to the Echo pro

Thank you, too bad nobody at Echo Pro thought about
facilitating the sync with other loop units.

Best, Alessandro

--- Kim Flint <kflint@loopers-delight.com> wrote:
> At 11:15 AM 6/25/2003, Alessandro Ricciarelli wrote:
> >Thanks for your reply - it's confusing, since in
> the
> >Line6 Echo Pro's Manual it says that the looper
> will
> >accept Midi commands (such as 101 for "play", 102
> for
> >"overdub" a.s.o.) So I thought it might be possible
> to
> >have the Echoplex transmit those Midi messages ....
> 
> the Echoplex won't send commands for a different
> device. It does send the 
> right commands for another echoplex, so you can
> chain echoplexes together 
> easily.
> 
> You could just use a midi controller programmed to
> send the right commands 
> to each device when you push one button. The two
> will basically start and 
> stop recording at the same time if you do that.
> However, they will slowly 
> drift apart because you do not have any sync
> connection between them, and 
> the two loops can never be precisely the same
> length. It might be ok for a 
> short time. When you have a sync connection between
> them this problem is 
> solved, since it will correct the drift and keep
> them together forever. 
> Unfortunately the echo pro does not have midi sync
> for the looper function, 
> so you can't sync it to anything.
> 
> kim
> 
> 
> 
>
______________________________________________________________________
> Kim Flint                     | Looper's Delight
> kflint@loopers-delight.com    |
> http://www.loopers-delight.com
> 


__________________________________
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com