Support
Looper's Delight
|
Support |
|
|
Unfortunately the Repeater doesn't come out of record if you hit reverse. You have to hit play or record again before reverse can be engaged. On Monday, January 12, 2004, at 05:24 pm, Glenn Poorman wrote: > I don't know about the Repeater but you can do this on the EDP. > And since you use fairly basic controls to do it, you might be > able to try this and see if it works on the Repeater. > > On the EDP, you can end a record by hitting reverse at which > point your loop stops recording, switches to reverse, and starts > playing back backwards. If you then turn your feedback to zero > (one repeat only) then voila. Hit record, play a phrase, hit > reverse, phrase plays back one time in reverse, repeat all of > the above steps. > > Glenn > >> -----Original Message----- >> From: Paul Greenstein [mailto:paul@ubiq.co.uk] >> Sent: Monday, January 12, 2004 10:59 AM >> To: loopers-Delight@loopers-delight.com >> Subject: repeater instant reverse >> >> this is just me being totally lazy, but I'm wondering if anyone else >> has already figured out how to do this (maybe it's not possible). >> >> Using the FCB1010 and repeater, I want to be able to play a phrase, >> then hit one switch, and immediately hear the phrase reversed. I then >> want to be able to play another phrase, and hear that one reversed (by > >> hitting the same switch) and so on... >> >> I suppose it would be something like getting one switch to disable >> overdub mode, clear the current loop, go into record, and toggle >> reverse on/off. The more I think about it, the more unlikely it seems, > >> but anyway.... >> >> cheers >> >> Paul > >