RE: Repeater Loop Select

["Bernhard Wagner" <loopdelightml@nosuch.biz>]

I don't know if that specific question is discussed here:
http://www.xmlizer.biz/cgi-bin/repeater-users/kwiki.cgi but since you are
using the Repeater in conjunction with the EDP it might be a useful
resource.
Bernhard

> -----Original Message-----
> From: Doug Cox [mailto:dougcox@pdq.net]
> Sent: Samstag, 2. Oktober 2004 06:44
> To: Loopers-Delight@loopers-delight.com
> Subject: Repeater Loop Select
>
>
> I can't find the answer in the archives, but I'm almost sure it was
> discussed back in the early Repeater days...
>
> I know that the Repeater's MIDI implementation allows for direct 
>selection
> of the internal (and CFC card) loops via Program Changes.  At first I
> thought this didn't work, because I couldn't get the Repeater to select a
> new loop.  But then I realized that the PC command will only
> select the new
> loop if it's already been recorded.  It seems that one must use "Next 
>Loop
> Up" and "Next Loop Down", and then a subsequent press of Record,
> to move to
> a new loop and record in it.
>
> At least the Repeater does this "quantized".  I like that!
>
> Given all of this, has anyone have suggestions or strategies for moving
> between loops on both an EDP and a Repeater, that is manageable with a
> typical MIDI footcontroller?  I'm using the FCB1010, and would
> love to have
> one button that would move to the next loop on both the EDP and the
> Repeater, with no subsequent presses.  Any ideas?
>
> Doug
>
>
>