Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

RE: EDP Hiss



Yeah, I'd like to know the answer to this too...is the problem
addressable by hardware or embedded software mods?    Again, it baffles
me that I've spent close to a thousand dollars a piece on two "mono"
looping units that produces more hiss than my some of my 15 year old
effect processors. 

Kris

-----Original Message-----
From: Tom Combs [mailto:tcombs@sep.com] 
Sent: Saturday, March 05, 2005 10:44 AM
To: Loopers-Delight@loopers-delight.com
Subject: Re: EDP Hiss


Improper in what way?  A flaw in the EDP design

 
Jesse Lucas wrote:

>
> My EDP is the same way.
>
> Kim, et al claim it's improper gain staging.
>
> I've accepted the hiss.
>
> -J
>
>
>
> Tom Combs wrote:
>
>> Hey EDP gurus
>>
>> I've been experiencing some significant hiss during loop playback.
>> I've tried swapping memory around - no success.  The hiss is present 
>> even when I record a loop with the input level at minimum.  The hiss 
>> is not present while recording, but it appears immediately after the 
>> second press of RECORD to start loop playback.  The hiss goes away 
>> when I set the MIX to dir.  It gets louder as I more the MIX to loop.
>>
>> My EDP has always been hissy - I don't know if it's gotten worse
>> lately or if I'm more tuned into it.  I guess this could be normal 
>> behavior for the EDP, but I can't imagine this much noise being 
>> acceptable to the looping community.
>>
>> Any ideas?
>>
>> Thanks,
>> Tom
>>
>>
>