Support |
Luis, when you say: >I am sending all kinds of MIDI >comands to both loopers plus efx processor and when i >do a lot of stomping they sometimes react >weird,specially the repeater. > I was getting some Repeater tempo-fluctuation while it and EDP ran...I set Repeater Sync to User, and it seems ok. (I am not intentionally syncing clock on the units...at this time in my MIDI abilities, anyway!). They, of course, have a MIDI cable connecting, for FCB control of both, but are on different MIDI channels. I guess Clock data doesn't need the same channel, however...(?). Overdubbingly, David Luis Angulo wrote: >Hey David, >I am also considering doing "cleansing" by connecting >an additional foot controller to only control my >preamp and effects,then a second one only for the >Repeater and EDP.I am sending all kinds of MIDI >comands to both loopers plus efx processor and when i >do a lot of stomping they sometimes react >weird,specially the repeater.I also could access >presets and put them into the loops quicker than >scrolling to the Banks. >just curious,is anybody here using more than one Foot >controller? >cheers >Luis > > > >--- ".David.Auker." <DaVAuk@Hevanet.com> wrote: > > > >>I'm curious if anyone is controlling both the EDP >>and Repeater with the >>FCB. Care to share how you have the presets >>configured? >> >>I have a few banks set up, but need to do some >>"housecleaning" in there >>for more conciseness, less duplication. One issue >>is I have both Ex >>Pedals tied up for Repeater, and need to free one >>for EDP Volume and >>Feedback control. >> >>Fun I've been having: pre-set Repeater for Reverse, >>then one FCB Preset >>starts both EDP and Repeater recording, with another >>tap for the loop to >>begin. Then I tap another Preset to Forward >>Repeater, so I have both >>forward and backward going simultaneously... >> >>.David. >> >> >> >> > > >www.luis-angulo.com > > > >__________________________________ >Yahoo! FareChase: Search multiple travel sites in one click. >http://farechase.yahoo.com > > > > >