Support
Looper's Delight
|
Support |
|
|
|
I was seriously tempted to do a hardware tweak and
change capacitors to polyester instead of electrolytic (which I think would be
worth a try regardless) but instead I always messed around with
the gain and the setting switch to get the best sound. I EQ and amplify a
smidge coming off the guitar so that helps prevent distortion as
well.
It also is IMPERATIVE to make sure there are no
grounding issues. If there is anything else powered in your setup, you can
end up with hissing noise from ground loops as well. I had extra wiring to
make sure I was grounded in my practice room and that was the only way to get
rid of the hiss. When I confronted the makers of it they recommended your
solution but I was worried about the tone being messed up as well.
And finally, a cleaning of the innards seems to
help.
There is a knife edge where it seems the
boomerang functions quietly and wonderfully, and it seems that every day
it's a new cutlery set.
That's why I'm an EDP guy. If they put a
roller volume on the EDP and made it for variable feedback it'd be
AWESOME!
Hope this helps!
Plish
|