Support
Looper's Delight
|
Support |
|
|
Yes, patch mode allows you to use any midi channel per CTL or EXP pedal (incl. the external ones). With the EXP pedals you can send up to 6 control messages on different midi channels, for example a volume cross-fade with 2 different devices. The standard and control modes uses the global midi channel and both the CTL and EXP pedals can only send 1 CC message. I have been experimenting with all modes the last couple of months to minimize the "tap dancing". Tip: keep in mind you can control multiple devices on the same midi channel, but you have to be sure you use different control change messages for each device. That's how I use my FC-300 now, because this allows you to use the CC mode and you then have 10 CTL pedals per setup in stead of 2 in patch mode :) So at the moment I use a combination of Control mode and Standard mode and I switch from STD to CC mode with a additional Boss footswitch. Standard mode * Pedal 1-8 selects the corresponding LP1 track * CTL1=midi sync/overdub * CTL2=erase track => my emergency button :) Control mode * 1-10: midi sync/overdub, stop, play, fade, swell, reverse, half speed, low scramble, mid scramble, high scramble * CTL1:previous track * CTL2: next track All modes: * Expression pedal 1: Volume * Expression pedal 2: Feedback * 1 FS-6 footswitch connect to switch modes (CC-STD) PS I just uploaded my LP1 and FC-300 setup, see http://euroloopfest.com/sjaak/lp1.htm --- Sjaak http://www.livelooping.be/ http://www.overgaauw.be/ http://www.myspace.com/sjaakovergaauw